Hello, and although I have a question regarding the utilized components, if this will work everything as it should. I am lover of electronic music and in my opinion this includes a strong bass. Well .. and I'm sure, is that it certainly is not the great sound, it sounds good or not even close, but we'll, the new plant is just about to buy but I'm tinkering with regard always open to everything and so I got the following Idea: I have the following power supply out of my closet rummaging: HEC 300 LR-PT me by a friend following amplifier gemobbst: Alpine 3542 and bought the subwoofer from a colleague for few euros: Ground Zero GZIB 120X I have the AC adapter and the yellow, black, red and stripped a green cord and yellow connected (12V +) all black cables except one (12 volts - / ground), all red (Remute) and just a black wire with a green so that the power supply just turns . If I now the power supply (at 12 volts / 15 amps / 180 watts) with the output stage [(2x 60 watts RMS) / (I bridge it => 1x 160 Watt RMS)] connect, and a cell phone or laptop via RCA to jack cable to connect the output stage ... 1 Dignity as a peep come out? 2 I still need a crossover, or is already Installed in the amplifier? 3 Do I iwas change to make it work? PS: The subwoofer is in-Kilnke operated by jack in to a phone cable with a normal PC loudspeaker transmits system Paralles so that the mids and highs can occur to the fore. Clear .. it Schei will listen ** e and its way too much bass but it is just pure amusement and pleasure and whim If anyone has room for improvement, I have an open ear Sincerely Pascal
http://thehungergamescatchingfire2.wordpress.com/
http://www.imdb.com/list/608aS31n8Hg/
http://www.imdb.com/list/ZO9mj0wTviY/?publish=publish
Hello, and although I have a question regarding the utilized components, if this will work everything as it should. I am lover of electronic music and in my opinion this includes a strong bass. Well .. and I'm sure, is that it certainly is not the great sound, it sounds good or not even close, but we'll, the new plant is just about to buy but I'm tinkering with regard always open to everything and so I got the following Idea: I have the following power supply out of my closet rummaging: HEC 300 LR-PT me by a friend following amplifier gemobbst: Alpine 3542 and bought the subwoofer from a colleague for few euros: Ground Zero GZIB 120X I have the AC adapter and the yellow, black, red and stripped a green cord and yellow connected (12V +) all black cables except one (12 volts - / ground), all red (Remute) and just a black wire with a green so that the power supply just turns . If I now the power supply (at 12 volts / 15 amps / 180 watts) with the output stage [(2x 60 watts RMS) / (I bridge it => 1x 160 Watt RMS)] connect, and a cell phone or laptop via RCA to jack cable to connect the output stage ... 1 Dignity as a peep come out? 2 I still need a crossover, or is already Installed in the amplifier? 3 Do I iwas change to make it work? PS: The subwoofer is in-Kilnke operated by jack in to a phone cable with a normal PC loudspeaker transmits system Paralles so that the mids and highs can occur to the fore. Clear .. it Schei will listen ** e and its way too much bass but it is just pure amusement and pleasure and whim If anyone has room for improvement, I have an open ear Sincerely Pascal